Resolve Pet High Traffic Foam Large Area Carpet Cleaner - 22 Oz

• Makes cleaning large areas of carpet and upholstery easier.
• Eliminates pet odors, freshens with a light, clean scent, and discourages pet re-soiling.
• Contains no CFCs or other ozone-depleting substances.
• Leaves carpet plush.

Easy to use:Resolve pet high traffic foam has a unique cleaning formula to help make cleaning large areas of carpet and upholstery easier.

• Powerful odor stop technology eliminates pet odors, freshens with a light, clean scent, and discourages pet re-soiling.
• The foam protects against dirt and pet stains while leaving carpet plush.
• It also makes cleaning easier, helping prevent future soils from setting deep into carpet fibers and upholstery fabrics.

• Resolve pet high traffic foam works great on tough stains, including urine, vomit, feces, and tracked-in dirt.
• Resolve aerosol cans contain no CFCs or other ozone-depleting substances.
• The formula contains no phosphates.

• This product is safe to use on most wool, nylon, and stain-resistant carpet.
• Contents will clean a carpeted area of 168 square feet (12 by 14 feet).
• To avoid rings, clean the entire section where soil occurs.
• Use vacuum cleaner with a fresh, empty bag.
• If accidentally sprayed on wood furniture, just wipe off.
• Not recommended for velvet, silk, vinyl, or leather.

• Before cleaning, vacuum carpet thoroughly to remove loose dirt.
• Test a hidden section of carpet for colorfastness.
• If color is affected, do not use.
• For use in resolve easy clean carpet brush:
• Remove spray cap from resolve pet high traffic foam 22-ounce can.
• Shake the can before each use.
• If the can is already in the easy clean carpet brush, remove and shake again.
• Insert can into the brush and rotate clockwise until it gently clicks into the locked position.
• To remove the can, rotate counter-clockwise into the carpet.
• When dry, vacuum thoroughly to remove dried foam and loosened dirt.
• Pull trigger to dispense foam, then brush the foam into the carpet.
• Replace spray cap for standard use.
• Large area carpet cleaning: Shake can well.
• Hold can upside down about 2 feet above carpet.
• Spray foam evenly over a 3-square-foot area.
• Work the foam into carpet in two directions using a damp, colorfast mop.Repeat steps one and three until the area is cleaned. When dry, vacuum thoroughly to remove dried foam and loosened dirt.
• Upholstery cleaning: For upholstery, look for fabric manufacturers cleanability code tag.
• Use on fabrics coded WS or W.
• Do not use if coded X or S.
• Blot wet soils with a clean, absorbent cloth.
• Shake can well and generously apply directly to stain from a distance of 4 to 6 inches.
• Allow foam to absorb into stain for three minutes.
• Gently blot area with a clean, damp, colorfast sponge or cloth.
• Rub gently if required.
• Do not over-wet fabrics.
• Rinse sponge or cloth and repeat as necessary.
• Allow fabric to dry thoroughly before use.

• Keep out of reach of children.
• Caution:
• Do not puncture or incinerate container.
• Do not expose to heat or store at temperatures above 120 degree F (49 degree C).
• Avoid freezing.
• Contains no phosphates.

Please read all label information carefully on delivery and prior to use.